Quick answer: Steel sweats. When humid air touches a metal panel colder than the air's dew point, water beads on the back of the steel and drips into insulation and framing, and a shop that shares air with the house adds its own smells. The fixes: insulation that keeps humid air off the metal, a tight wall between shop and house, and indoor humidity near 50%.
Why do metal buildings sweat?
A thin steel panel changes temperature fast, and air touching it gives up water once the panel drops below the air's dew point, the temperature at which air can no longer hold its moisture. On a clear night, a metal roof gives off heat to the open sky and can cool below the outdoor air temperature. Humid Central Texas air under that roof meets the cold panel and condenses, the way a windshield fogs on a cool spring morning. In an uninsulated shop, it can drip like rain by sunrise.
The slab can sweat too. After a cold front, the concrete stays cool for days. When warm, sticky Gulf air rolls back in, water beads up on the floor even though it hasn't rained. Anyone who has kept a shop around here has seen a slick, wet slab on a dry day.
What makes the air in a barndo feel stale?
Condensation is half of it. The other half is how these buildings are laid out and used:
- The shop shares air with the house. A wall with gaps, an unsealed attic space over both sides or a door left open carries the smells of exhaust, gasoline, grass clippings, sawdust and the dog's bed into the house.
- Roll-up doors stay open all day. Humid outdoor air pours in, then gets closed in at night.
- Insulation gaps let air reach the metal. A torn facing on fiberglass blankets or an unsealed ridge and eave gives humid air a path to the cold panel.
- One big open room is hard to dry. An oversized AC cools a tall great room fast, shuts off before it pulls much water out, and leaves the air cool but clammy.
How do you stop condensation in a barndominium?
Keep humid air away from the metal, then keep the living space dry.
- Seal and insulate against the metal. Closed-cell spray foam and insulated metal panels are common choices because they keep humid air from reaching the steel. Ask your builder or an insulation contractor which fits your building.
- Repair torn facings and fill the gaps at the ridge, eaves and wall bases.
- Wall off the shop. Use a weatherstripped, insulated door between shop and house, and seal pipes and wires that pass through the shared wall.
- Give the living quarters their own cooling, sized for that space rather than the whole building. Gold Eagle Services, our sister company, sizes and installs systems in Austin-area homes.
- Hold humidity near 50% with a hygrometer to watch it and a dehumidifier when the AC can't keep up. Our guide to choosing a dehumidifier covers sizing.
- Shut the shop doors on muggy days after a front so warm, wet air doesn't hit a cold slab.
Our guide to new and tight homes explains why a well-sealed living space also needs a plan for fresh air.
What if you find growth on the framing or insulation?
Wet wood framing, stained insulation or spots on the drywall mean water has been reaching them for a while. Fix the leak or condensation first.
Mold in your AC system or ductwork? Call Gold Eagle Services, a licensed Texas mold remediation company that handles HVAC mold, at 512-489-4653. For mold anywhere else in the home, contact an independent state-licensed mold assessor or remediation company.
Where does a dry fog treatment fit?
After the moisture is under control. In the living quarters, Pure Maintenance Austin's dry fog treatment fills every room, closets included, and runs through the ductwork. On countertops, tile, steel door frames and other hard, non-porous surfaces it helps control the growth of odor-causing microorganisms, and it temporarily reduces airborne particulates as it settles. It's done in one day, with people and pets out for 4 hours.
Barndos vary a lot, so tell the Comfort Advisor about the layout on the free phone consultation, including the shop, the square footage of each side and how they connect. The written quote is based on square footage.
Common questions
Do all barndominiums have condensation problems?
No. A metal building that's well sealed and insulated against the steel behaves much like any other house. The trouble starts where humid air reaches cold metal.
Why does the shop floor get wet when it hasn't rained?
That's a sweating slab. After a cold snap the concrete stays cool, and when humid air returns, water condenses on it. Fans and closed doors help until the slab warms up.
Is a vapor barrier the same as insulation?
No. Insulation slows heat; a vapor retarder slows moisture. On a metal building you need both jobs done, and some products, like closed-cell spray foam, do both.
What should you do next?
- Look for drips, stains and wet insulation after the next cool, clear night.
- Seal the wall and door between the shop and the house.
- Check indoor humidity in the living quarters and hold it near 50%.
- Ask an insulation pro about gaps where air reaches the metal.
Get a free phone consultation
Book a free phone consultation. A Comfort Advisor will call you, learn what's going on in your home and send a written quote based on square footage. Pure Maintenance Austin, brought to you by Gold Eagle Services, serves all of Central Texas, including College Station, Round Rock, Georgetown, San Marcos, Bastrop and Marble Falls.
Call 512-904-4646 or email IAQ@goldeagleservices.com. We're open Monday through Saturday, 7am to 7pm.